Tapco Classic Ridge End Cap 90 °
Tapco Classic Ridge to Hip End Weather Caps 90 ° - Priced Each.
Tapco classic Ridge End Caps provide a practical and weatherproof finish at the end of the run ridges.
Unlike the standard ridge and hip caps which are easily pulled or squeezed to suit the roof pitch these are manufactured to meet with certain roof pitches/angles of degree. If you need further assistance to workout your roof pitch/degree, simply watch the handy video clip to learn more.
These weather clips come in the same standard colour finishes as the slates themselves to provide a seamless appearance.
Suitable for TapcoSlate Classic and TapcoSlate Classic Ridge & Hip Caps, this accessory is a dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge. Currently available in all six, stocked, Traditional TapcoSlate colours – 801 Stone Black, 804 Pewter Grey, 809 Red Rock, 709 Brick Red and 712 Chestnut Brown. Also stocked in three pitch variants, choose from 25 to 29 degrees, 30 to 34 degrees and 35 to 40 degrees to match the slope of your roof. This ridge accessory is manufactured in the same material as our TapcoSlate Classic product to beautifully match your roof slate. TapcoSlate Classic ridge 90° end caps have a degree of flexibility when fixing and have the same properties as our roofing slate:
- Lightweight – as low as 12kg per square metre.
- Easy to install with pre-marked nailing guides and spacers.
- Easily cut with a fine-toothed saw or sharp utility blade.
- Mechanically fixed.
- Choice of six colours
- Choice of three pitches (25 to 29°, 30 to 34° & 35 to 40°).
- 40-year warranty.
- Fully tested to BBA, ETA and CE standards, including fire rating, wind, driven snow & rain, and water absorption.
- TapcoSlate Classic ridge 90° end caps are not made from recycled plastics but are manufactured from recyclable virgin limestone and polypropylene.
Dimensions of 25 to 29 degree end cap: Overall Length 445mm, Overall Width 290mm, Overall Height 70mm, Side Pitch 25°, End Pitch 90°. To Fit 25° to 29° roof pitches.
Dimensions of 30 to 34 degree end cap: Overall Length 445mm, Overall Width 275mm, Overall Height 80mm, Side Pitch 30°, End Pitch 90°. To Fit 30° to 34° roof pitches.
Dimensions of 35 to 40 degree end cap: Overall Length 445mm, Overall Width 265mm, Overall Height 90mm, Side Pitch 35°, End Pitch 90°. To Fit 35° to 40° roof pitches.
No reviews have been left for this product, be the first to leave a review